Samsung Galaxy S7 Edge: How to Act Your Phone as Power Bank

If needed, you can act your Samsung Galaxy S7 Edge as power bank so it can be used to charge other phones anytime and anywhere by utilising the supplied USB connector and a USB cable.


How to act your Samsung Galaxy S7 Edge as power bank?
As the example, we'll use Samsung Galaxy S7 Edge to charge the battery of Samsung Galaxy S5 by using the following steps:

1. Plug the supplied USB connector to the multipurpose jack in the Samsung Galaxy S7 Edge.
   
   
2. Open the multipurpose jack cover in Samsung Galaxy S5 and then plug the micro USB cable to the multipurpose jack.
   
   
3. Plug the other end of the USB cable to the USB connector in the Samsung Galaxy S7 Edge.
   
   
4. Now, Samsung Galaxy S7 Edge will start charging the battery of Samsung Galaxy S5.
   
   
5. When you're done charging the phone, disconnect both phones by unplugging the USB adaptor from the Samsung Galaxy S7 Edge and then unplug the micro USB cable from the Samsung Galaxy S5.

   FYI, make sure to close the multipurpose jack cover in Samsung Galaxy S5 for protection against water damage.

Samsung Galaxy S5: How to Enable and Use USB Tethering in Android 5.0.1 Lollipop

There are some features in Samsung Galaxy S5 that can be used to share its mobile data connections with other devices, one of which is USB tethering. If you have a Windows computer, you can enable the USB tethering feature in your phone so you can use its mobile data connection in your PC when both these devices are connected using the USB cable.

------------------------------------
Disclaimer: this post is written based on Samsung Galaxy S5 SM-G900H runs with Android 5.0.1 Lollipop and the computer uses Windows 7 Professional 32-bit as the operating system.
------------------------------------

How to enable and use USB tethering?
Assuming that mobile data in your phone is enabled, you can share its connections to your Windows PC by using the following steps:

1. Connect your phone to the computer using the provided USB cable by plugging the micro USB connector to the micro USB port in your device (it's located under the Home key) and the USB connector to a USB port on your PC. If it's the first time for you to connect your phone with the PC, your PC may need a few minutes to install the driver.
2. Now, open your phone's settings menu by swiping down the top of the screen to open up the notification panel and then tap at the top right to go to the settings menu.
3. With the settings menu is displayed in grid view, scroll down to the Network connections section and then tap Tethering and Mobile hotspot .
4. Check the box next to USB tethering to enable this option. When the USB tethering is enabled, the tethering icon will be displayed in the status bar.
5. If it's the first time for you using the USB tethering feature with your PC, your PC may need a few minutes to install the driver.
6. Once done, you can automatically use your phone's mobile data connections in your PC.

Samsung Galaxy S5: How to Edit Tagged Information in a Photo in Android 5.0.1 Lollipop

When you have enabled the tag buddy feature in the stock Gallery app, the tagged information(date and time, location, category and tags) will be displayed at the bottom left corner of each photo. If needed, you can easily edit the tagged information, for instance: assign other categories, enter a new tag, etc.

How to edit tagged information in a photo in the stock Gallery app?
You can do so by using the following steps:

1. Open Gallery app.
2. Tap an album and then tap the required picture.
3. Tap the tagged information in the bottom left corner, or tap at the top right and then select More info.
4. Tap at the top right to edit the tagged information of the selected picture.
5. Now, you can edit the required information, such as: set/change/remove location, assign or remove categories, add or remove tags. As a note, since the people's faces you have tagged can't be removed from here, if you'd like to remove the tagged name, you can find the complete steps here.
6. Tap Done button to save the changes.

Samsung Galaxy S5: How to Enable Tag Buddy Feature in Gallery App in Android 5.0.1 Lollipop

Tag buddy is a useful feature in the stock Gallery app that can be used to tag your photos with some information, such as: date and time, categories, location and tags. The tagged information will be displayed at the bottom left corner of each photo.

How to enable the tag buddy feature in the stock Gallery app?
You can turn this feature on by using the following steps:

1. Open the stock Gallery app.
2. Tap at the top right corner of the screen or long press the Recent apps key to open up the additional options and then select Settings.
3. If needed, scroll down the screen.
4. Tap Tag buddy.
5. Slide the ON/OFF switch to the right to enable the tag buddy feature. The switch turns green when it's enabled.
6. Now, you can enable the following options to tag them in your photos:
• Date: enable this option to let your phone adds the date and time to your photos. Your phone will use the currently set date and time when the picture was taken.
• Location: enable this option to let your phone adds location data to your photos. Your phone will use the currently location where the picture was taken. As a note, this feature works if you have enabled the location tags feature in the stock Camera app before taking the photo.
• Category: enable this option to let your phone assigns categories to your photos automatically. There are 7 default categories available: people, scenery, documents, food, pets, vehicles and flowers.
• Tags: enable this option if you want to be able to add tags to your photos. If you have tagged people's faces within a photo using the face tag feature, the tagged names will automatically be displayed under this option.

Samsung Galaxy S5: How to Enable Location Tags Feature in Camera App in Android 5.0.1 Lollipop

The stock Camera app comes with several useful features, one of which is the location tags. When you enable this feature, each picture taken with the stock Camera app will be attached with a GPS location tag. But, you have to remember that since these pictures contain with location information, make sure you use caution when you send, share, distribute or copy them.

How to enable the location tags feature in the stock Camera app?
You can do so by using the following steps:

1. Open the stock Camera app. If you'd like to speed up the way to access the stock Camera app, you can enable the camera shortcut on the lock screen.
2. Tap at the top left to open up the settings menu of the stock Camera app.
3. Scroll down the menu and then tap Location tags .
4. A pop up window contains with information about the location tags feature is displayed on your screen. Tap OK button to continue.
5. Since the location tags feature works by utilizing the location service, if it's disabled, you'll be brought to the Location menu and asked to enable it. You can enable it by sliding the ON/OFF switch to the right and then tap Agree button if you'd like to improve location accuracy. You will need to press the Back key to return to the Camera app.
6. The location tags feature has been enabled.
7. From now on, each picture taken with the stock Camera app will be attached with the geographical location data.

Samsung Galaxy S5: How to Use Magnifier in Android 5.0.1 Lollipop

Samsung Galaxy S5 comes with set of default widgets, one of which is the magnifier widget. This widget works by utilizing the rear camera to help you magnify text or objects. Before you can use the magnifier widget, you have to add it to your home screen first.

How to add the magnifier widget to the home screen
You can do so by using the following steps:

1. While you're in home screen, long press the Recent apps key or long tap on a blank area of the home screen.
2. Tap the Widgets button at the bottom of the screen. It'll quickly bring you to the widgets list.
3. Find the Magnifier 1x1 widget .
4. Tap and hold the widget and then drag it to the home screen.
5. Release the widget to place it in home screen.
6. The magnifier widget has been added to home screen.

How to use the magnifier widget?
See the following steps as the example of using the magnifier widget:

1. Tap the magnifier widget icon in your home screen to open it.
2. Aim the camera to the desired text or objects.
3. Adjusting the magnification:
• Tap at the bottom of the screen to increase the magnification.
• Tap at the bottom of the screen to decrease the magnification.
4. Adjusting the focus:
• Tap at the top right to focus in the center of the screen.
• To change the focus manually, tap where you want to focus.
5. Using the flashlight:
   While you're viewing text or objects in dark or low light condition, you can tap at the top of the screen to turn on the flash.
6. Taking a photo of text or objects:
• Tap at the top left.
• If needed, you can adjust the magnification by tapping or at the bottom of the screen before saving the image.
• Tap at the top right to save the image.

Samsung Galaxy S5: How to Manage Primary Contacts in Android 5.0.1 Lollipop

If you want to use send help messages feature, you have to register at least one contact as your primary contact. That's why when you enable the send help messages feature for the first time, you'll be asked to set your primary contact. Your primary contacts will be alerted to your situation via messages when the emergency situation is declared. However, you can manage your primary contacts when needed, such as: add contacts to the primary contacts list or delete contacts from the primary contacts list.

How to add or delete primary contacts?
You can do so by using the following steps:

1. On any screen, swipe down the top of the screen to open up the notification panel and then tap at the top right to go to the settings menu.
2. With the settings menu is displayed in grid view, scroll down to the System section and then tap Safety assistance .
3. Tap Manage primary contacts. To add a contact to the list go to the step #4, while to delete a contact from the list go to the step #5.
4. To add a contact to the primary contacts list, do as follows:
• Tap at the top of the screen.
• Select Create contact if you want to create a new contact and then set it as your primary contact, or select Select from contacts if you want to pick up contacts from your contacts list and then set them as your primary contacts.
• The selected contacts have been added to the list and set as primary contacts.
5. To delete a contact from the primary contacts list, do as follows:
• Tap at the top right.
• Select the required contacts you want to delete.
• Tap Delete at the top right.
• Tap Delete button to confirm.
• The selected contacts have been deleted from the list.

Samsung Galaxy S5: How to Enable Send Help Messages Feature in Android 5.0.1 Lollipop

Send help messages is a feature available in Samsung Galaxy S5 that will let you send emergency messages to your primary contacts by pressing the Power key quickly three times. The emergency messages contain with your current location information, audio recordings and pictures of your surroundings. As a note, to make this feature works, you have to register at least one primary contact so that you can alert the contact about your situation via messages when you're in any emergency situation.


How to enable send help messages feature?
You can turn on this feature by using the following steps:

1. On any screen, swipe down the top of the screen to open up the notification panel and then tap at the top right to go to the settings menu.
2. With the settings menu is displayed in grid view, scroll down to the System section and then tap Safety assistance .
   
   
3. If it's the first time, you'll be asked to set your primary contacts before you can enable send help messages feature. Tap Add button to set your primary contacts.
   
   
4. Here, you'll be provided with two options that can be used to set your primary contacts:
   
   • Create contact: select this option if you want to create a new contact and then set it as primary contact.
   • Select from contacts: select this option if you want to pick up contacts from your contacts list and then set them as primary contacts.
   
5. Press the Back key to return to the safety assistance menu.
6. Tap Send help messages.
   
   
7. Slide the ON/OFF switch to the right to enable this feature. The switch turns green when it's enabled. As a note, your location information will automatically be included when you send emergency messages. If needed, you can also enable the following options:
• Send pictures: enable this option if you want to include pictures taken using the front-facing and rear cameras when you send emergency messages.
• Send sound recording: enable this option if you want to include an audio recording of your surroundings when you send emergency messages.

Samsung Galaxy S5: How to Set My Phone to Say the Caller's Name of a Specific Contact in Android 5.0.1 Lollipop

Yesterday, an insider left his comment and said that he wanted his phone to say his friend's name when receiving incoming calls from her. Fortunately, if you own Samsung Galaxy S5, you can enable the notification readout feature for favourite calls so that your phone will read the caller's name when receiving incoming calls from your favourite contacts, or you can use the stock Voice recorder app to record your voice that say a contact's name and then set it as ringtone for the desired contact.

How to enable notification readout feature for calls from favourite contacts?
You can do so by using the following steps:

1. On any screen, swipe down the top of the screen to open up the notification panel and then tap at the top right to go to the settings menu.
2. With the settings menu is displayed in grid view, scroll down to the System section and then tap Language and input .
3. Scroll the screen to the very bottom and then tap Notification readout.
4. Check the box next to Calls from favourite contacts to enable it.
5. From now on, when your favourite contact calls you, your phone will say the caller's information. As the example, if you have added a contact named "John" as favourite, your phone will say "incoming call from John" when receiving call from him. If you don't know how to add a contact to favourite, you can see the complete steps here.

How to assign your voice recording as caller ringtone?
You can record your voice by using the stock Voice recorder app and then set it as ringtone for a specific contact by using the following steps:

1. Open Voice recorder app.
2. To record your voice, do as follows:
• Tap to start recording.
• Say a phrase contains with the name of the desired contact with clearly, e.g: "you have incoming call from John".
• Tap to stop recording.
3. In the recordings list, long tap the voice recording you have just recorded to select it.
4. Tap at the top right or long press the Recent apps key to open up the additional options and then select Set as.
5. Tap Caller ringtone.
6. Select the required contact.
7. The selected voice recording has been set as ringtone for the selected contact.
8. From now on, when the selected contact calls you, your phone will play the voice recording you have set as caller ringtone.

Samsung Galaxy S5: How to Disable Emergency Mode in Android 5.0.1 Lollipop

When the emergency mode is enabled, it will help you extend your phone's standby time as long as possible by restricting some apps, changing the screen colour to greyscale theme, reducing the screen brightness, etc. However, you can easily switch back your phone to the standard mode when you want to use all features and apps in your phone by disabling the emergency mode.


How to disable emergency mode?
You can turn off this mode by using two different methods: from the device options menu and from the additional options in the emergency mode home screen.

Method #1: From the device options menu

1. Long press the Power key to open up the device options menu.
2. Tap Emergency mode.
3. Tap Disable button.
4. The emergency mode will be disabled.

Method #2: From the additional options in the emergency mode home screen

1. While you're in the emergency mode home screen, tap at the top right or long press the Recent apps key to open up the additional options and then tap Disable Emergency mode.
2. Tap Disable button.
3. The emergency mode will be disabled.